Halloween Costumes  /  Search Results
ABOUT US


 Page 1 2 3 of 3 | Next

By Rockin Rodger

from Oshkosh,Ne.

About Me Budget Shopper

Verified

(1 of 1 customer found this review helpful)

Cool Prop

 
3.0

Pros

  • Fun To Use

Cons

  • Head kept getting stuck
  • Difficult To Use

Best Uses

  • Halloween

Comments:

Easy to put together,hose didnt fit fog machine,had to duct tape to fogger then it got hot and tape didnt hold. Head kept getting stuck when it turned to the right. Had to keep going outside and jiggle head so it would move right.I put more white paint on face with sponge,looks even better.


By Macsteve's Halloween show

from Fairfax, VA

About Me High-end Shopper

Verified

(2 of 2 customers found this review helpful)

Great concept but a little flimsy

 
3.0

Pros

  • Unique
  • Scary

Cons

  • Poorly Made

Best Uses

  • Halloween

Comments:

The Fuming Rotter is a pretty interesting concept and I intended to place it under my portico to greet the tricker treaters. With the fog machine set to short intervals for both fog and between sessions, there is almost always a bit of mist coming out of its mouth. The problem is the motor appears under powered and insufficient to keep the head moving. The one I received stops pretty often. A small nudge gets it moving again but usually only for a few seconds. Even without moving, it looks good but if you pay for animatronic, it's nice to get it!


By psmith

from crown point, in

(1 of 1 customer found this review helpful)

rotting corpse

 
1.0

Pros

Cons

Best Uses

Comments:

Disappointed in this prop. After putting it together it appeared that the head was too heavy for the motor to move it from side to side. The fog portion does work but you do not get the full effect without head movement.


By Joe Halloween

from Alexandria, VA

About Me Midrange Shopper

(2 of 2 customers found this review helpful)

Fuming Rotter Anim Fog Accessory -AWEFUL

 
1.0

Pros

Cons

  • Did Not Fit to Hose
  • Hose Weight Stops Rotter
  • Poorly Made

Best Uses

  • Not as a Rotter Adaptor

Comments:

The fog machine box said it would fit the Fuming Rotter, but there was NO WAY to connect the Fuming Rotter hose to the fogger. After I jury rigged that the host to fit the fogger with tape, after the hose attaches to the Rotter, the hose weight prevents the too-weak motor in the Rotter animation from working - the Rotter's head stops turning.


By nanaalice

from Portage, IN

About Me Midrange Shopper

(1 of 1 customer found this review helpful)

Fuming Rotter Animated Fog Accessory

 
2.0

Pros

  • Scary
  • Fun To Use

Cons

  • Poorly Made

Best Uses

  • Halloween

Comments:

I had to reorder this zombie three times and they were all broken. It is just frustrating to receive things in the mail that you have to return that are broken.


By halloween minion

from Whitecourt Alberta

About Me High-end Shopper

good concept poor execution

 
2.0

Pros

  • Looks good when not in us

Cons

  • Motor very underpowered

Best Uses

Comments:

looks good in the video however the motor is under - powered and stops constantly while turned on.


By colouch

from vancouver wa

(1 of 1 customer found this review helpful)

Foger? Really?

 
1.0

Pros

Cons

Best Uses

Comments:

I loved this decoration however it would not hook up to any foger that we had (3 different ones) We went back to spirit to get their foger and it didn't work with any they had. We asked the manager working the store and they said they rigged theirs up with duct tape. however the foger gets so hot that the duct tape just comes off. I wish someone would tell me what foger to use with it because it would be really cool if it worked!


By Halloween Kid

from Cincinnati, OH

About Me Midrange Shopper

Cool But Cheap

 
3.0

Pros

  • Scary
  • Unique

Cons

  • Motor Can't Support
  • Poorly Made

Best Uses

  • Parties

Comments:

This prop was very cool and I liked it but I notice when i set it outside with the fog, the head would turn then stop. Apparently the motor isn't strong enough to turn the head and fog tubes so unforunatly I had to return it.


By Disappointed

from kansas city

About Me Midrange Shopper

(2 of 2 customers found this review helpful)

Not happy

 
1.0

Pros

Cons

  • Poorly Made

Best Uses

  • Halloween

Comments:

Would be a good product if it had a stronger motor. I have taken two back and still not working properly. When you attach the hose for the fog machine, the motor that turns the head is to weak and catches and stops. I had to take hose off and just use the fog machine by itself so the head would still be able to move.


By MrBinks

from Los Angeles, CA

About Me Midrange Shopper

Verified

Simple, creepy, fun

 
4.0

Pros

  • Unique
  • Fun To Use
  • Durable

Cons

  • Small Hands Needed

Best Uses

  • Haunted House

Comments:

We are using this in our Zombie Themed haunted house. The head and hands that come with this unit are amazing! The shirt, however, is very thin and the arms have no form. Do your best to safely give the arms some body and this is an awesome apparatus.


By Halloween mom

from Chicago

About Me Midrange Shopper

Didn't work

 
1.0

Pros

Cons

  • Poorly Made

Best Uses

  • Halloween

Comments:

Item is poorly made and head did not move as shown. Also, 400 watt fogger did not connect properly and needs to be taped. Returning item.


By Scooter

from New Jersey

About Me High-end Shopper

Not enough motor torque

 
2.0

Pros

  • Good detail on zombie

Cons

  • Poorly Made
  • Weak motor

Best Uses

Comments:

This is a good prop, but the motor is very weak and cannot turn the head as advertised. Shame, because the head, hands and costume are pretty scary. Other fogger props out there for less.


By Luna

from Minneapolis,MN

About Me High-end Shopper

Verified

(1 of 1 customer found this review helpful)

EXTREMELY poor quality

 
1.0

Pros

Cons

  • Poorly Made

Best Uses

  • Halloween

Comments:

I bought this years'(2011) version of The Fuming Rotter. I missed it at the half off sale last year, and was so looking forward to getting it. Imagine my disappointment when I discovered that it doesn't work. The head turned back and forth twice before stopping. It will only work without the head attached--the motor is too weak to move the head. When I mentioned it to the manager of my local store, he said the 2 they had won't work either. Postings on Facebook confirm that many people have had the same experience. This total lack of quality is unacceptable.


By Leolopez7

from Stockton, Ca.

About Me Midrange Shopper

Verified

Delicate and Expensive.

 
3.0

Pros

  • Creepy
  • Unique
  • Scary

Cons

  • Delicate

Best Uses

  • Graveyard
  • Halloween

Comments:

The prop assembly consist of using a small Phillips screw driver and patience. I wasn't sure if the prop was suppose to come with the connector to the fog machine but mine did not. I had to use a Arizona can to connect it from the fog machine to the prop tubing. Also i had to stuff it with newspaper wrapped in plastic bags to make him look more realistic. Overall its a great prop.


By moondog

from madison,wi

be careful

 
4.0

Pros

Cons

Best Uses

Comments:

very fragile but looks awesome!


Page 1 2 3 of 3 | Next